TR_INIT - APMonitor Option
Main.OptionTrInit History
Show minor edits - Show changes to markup

Description: Traj initialization
Description: Trajectory initialization
TR_INIT is an option to specify how the initial conditions of the reference trajectory should change with each cycle. An option of 0 specifies that the initial conditions should start at SPHI and SPLO, creating an unchanging target over the horizon. An option of 1 makes the initial conditions equal to the current process variable value only on coldstart (APM.COLDSTART>=1) or with CTRLMODE <=2 when the controller is out of service. Otherwise, the reference trajectory is updated from the first step of the prior solution. When TR_INIT=2, the reference trajectory realigns to the controlled variable (CV) initial condition with each cycle. Each CV can have a different TR_INIT.
TR_INIT is an option to specify how the initial conditions of the reference trajectory should change with each cycle. An option of 0 specifies that the initial conditions should start at SPHI and SPLO, creating an unchanging target over the horizon. An option of 1 makes the initial conditions equal to the current process variable value only on coldstart (APM.COLDSTART>=1) or with APM.CTRLMODE <=2 when the controller is out of service. Otherwise, the reference trajectory is updated from the first step of the prior solution. When TR_INIT=2, the reference trajectory realigns to the controlled variable (CV) initial condition with each cycle. Each CV can have a different TR_INIT.

Description: Traj initialization (0=dead-band, 1=re-center with coldstart/out-of-service, 2=re-center always)
Description: Traj initialization 0=dead-band 1=re-center with coldstart/out-of-service 2=re-center always
(:title TR_INIT - APMonitor Option:) (:keywords TR_INIT, Optimization, Estimation, Option, Configure, Default, Description:) (:description Traj initialization (0=dead-band, 1=re-center with coldstart/out-of-service, 2=re-center always):)

Type: Integer, Input Default Value: 2 Description: Traj initialization (0=dead-band, 1=re-center with coldstart/out-of-service, 2=re-center always)
TR_INIT is an option to specify how the initial conditions of the reference trajectory should change with each cycle. An option of 0 specifies that the initial conditions should start at SPHI and SPLO, creating an unchanging target over the horizon. An option of 1 makes the initial conditions equal to the current process variable value only on coldstart (APM.COLDSTART>=1) or with CTRLMODE <=2 when the controller is out of service. Otherwise, the reference trajectory is updated from the first step of the prior solution. When TR_INIT=2, the reference trajectory realigns to the controlled variable (CV) initial condition with each cycle. Each CV can have a different TR_INIT.