APM.AUTO_COLD - APMonitor Option
Main.OptionApmAutoCold History
Hide minor edits - Show changes to output
Changed lines 5-6 from:
%width=50px%Attach:apm.png
to:
%width=50px%Attach:apm.png [[Main/DbsGlobal|Global Options]] | %width=30px%Attach:fv.png %width=30px%Attach:mv.png %width=30px%Attach:sv.png %width=30px%Attach:cv.png[[Main/DbsVariable|Local Options]]
Changed lines 15-17 from:
AUTO_COLD is the number of consecutive bad cycles to wait to attempt a [[Main/OptionApmColdstart|COLDSTART]] as an initialization mode for an application. It is by default at 0 (no action with bad cycles) but can be set to a higher integer level (1+) as a trigger to initiate a coldstart. When the AUTO_COLD limit is reached, the [[Main/OptionApmColdstart|COLDSTART]] flag is set to 1 (ON) and it remains on until there is a successful solution. Once a successful solution is found, [[Main/OptionApmColdstart|COLDSTART]] and [[Main/OptionApmBadCycles|BAD_CYCLES]] are set to zero.
to:
AUTO_COLD is the number of consecutive bad cycles to wait to attempt a [[Main/OptionApmColdstart|COLDSTART]] as an initialization mode for an application. It is by default at 0 (no action with bad cycles) but can be set to a higher integer level (1+) as a trigger to initiate a coldstart. When the AUTO_COLD limit is reached, the [[Main/OptionApmColdstart|COLDSTART]] flag is set to 1 (ON) and it remains on until there is a successful solution. Once a successful solution is found, [[Main/OptionApmColdstart|COLDSTART]] and [[Main/OptionApmBadCycles|BAD_CYCLES]] are set to zero.
See also [[Main/OptionApmBadCycles|BAD_CYCLES]], [[Main/OptionApmColdstart|COLDSTART]]
See also [[Main/OptionApmBadCycles|BAD_CYCLES]], [[Main/OptionApmColdstart|COLDSTART]]
Changed line 7 from:
Type: Integer, Input/Output
to:
Type: Integer, Input
Changed lines 9-10 from:
Description: Cold start model
to:
Description: Automatically cold start model after a
specified number of bad cycles
specified number of bad cycles
Changed lines 1-2 from:
(:title APM.AUTOCOLD - APMonitor Option:)
(:keywords APM.AUTOCOLD, Optimization, Estimation, Option, Configure, Default, Description:)
(:keywords APM.
to:
(:title APM.AUTO_COLD - APMonitor Option:)
(:keywords APM.AUTO_COLD, Optimization, Estimation, Option, Configure, Default, Description:)
(:keywords APM.AUTO_COLD, Optimization, Estimation, Option, Configure, Default, Description:)
Changed line 14 from:
to:
AUTO_COLD is the number of consecutive bad cycles to wait to attempt a [[Main/OptionApmColdstart|COLDSTART]] as an initialization mode for an application. It is by default at 0 (no action with bad cycles) but can be set to a higher integer level (1+) as a trigger to initiate a coldstart. When the AUTO_COLD limit is reached, the [[Main/OptionApmColdstart|COLDSTART]] flag is set to 1 (ON) and it remains on until there is a successful solution. Once a successful solution is found, [[Main/OptionApmColdstart|COLDSTART]] and [[Main/OptionApmBadCycles|BAD_CYCLES]] are set to zero.
Added lines 1-14:
(:title APM.AUTOCOLD - APMonitor Option:)
(:keywords APM.AUTOCOLD, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Automatically cold start model after this specified number of bad cycles:)
%width=50px%Attach:apm.png
Type: Integer, Input/Output
Default Value: 0
Description: Cold start model
0 = do not auto coldstart
1+ = cold start after specified number of
bad cycles as recorded by BAD_CYCLES
AUTOCOLD is the number of consecutive bad cycles to wait to attempt a [[Main/OptionApmColdstart|COLDSTART]] as an initialization mode for an application. It is by default at 0 (no action with bad cycles) but can be set to a higher integer level (1+) as a trigger to initiate a coldstart. When the AUTOCOLD limit is reached, the [[Main/OptionApmColdstart|COLDSTART]] flag is set to 1 (ON) and it remains on until there is a successful solution. Once a successful solution is found, [[Main/OptionApmColdstart|COLDSTART]] and [[Main/OptionApmBadCycles|BAD_CYCLES]] are set to zero.
(:keywords APM.AUTOCOLD, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Automatically cold start model after this specified number of bad cycles:)
%width=50px%Attach:apm.png
Type: Integer, Input/Output
Default Value: 0
Description: Cold start model
0 = do not auto coldstart
1+ = cold start after specified number of
bad cycles as recorded by BAD_CYCLES
AUTOCOLD is the number of consecutive bad cycles to wait to attempt a [[Main/OptionApmColdstart|COLDSTART]] as an initialization mode for an application. It is by default at 0 (no action with bad cycles) but can be set to a higher integer level (1+) as a trigger to initiate a coldstart. When the AUTOCOLD limit is reached, the [[Main/OptionApmColdstart|COLDSTART]] flag is set to 1 (ON) and it remains on until there is a successful solution. Once a successful solution is found, [[Main/OptionApmColdstart|COLDSTART]] and [[Main/OptionApmBadCycles|BAD_CYCLES]] are set to zero.