SPLO - APMonitor Option

Main.OptionSplo History

Hide minor edits - Show changes to markup

October 30, 2017, at 08:18 PM by 10.5.113.123 -
Changed line 11 from:

The lower range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint low (SPLO) is the lower final target value.

to:

The lower range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint low (SPLO) is the lower final target value. SPHI and SPLO are used with IMODE=3,6,9 when APM.CV_TYPE=1. The single set point SP is used with APM.CV_TYPE=2.

Restore
June 26, 2017, at 12:50 PM by 71.83.242.189 -
Added lines 12-13:

See also Controller Objective, SP, SPHI

Restore
June 08, 2017, at 10:41 PM by 10.5.113.159 -
Changed line 5 from:
to:
Local Options | Global Options
Restore
June 01, 2017, at 06:35 AM by 45.56.3.173 -
Added lines 1-11:

(:title SPLO - APMonitor Option:) (:keywords SPLO, Optimization, Estimation, Option, Configure, Default, Description:) (:description Set point low for linear error model:) 

 Type: Floating Point, Input
 Default Value: -1.0e20
 Description: Set point low for linear error model

The lower range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint low (SPLO) is the lower final target value.

Restore