APM.SPC_CHART - APMonitor Option

Main.OptionApmSpcChart History

Hide minor edits - Show changes to output

June 09, 2017, at 12:50 AM by 10.5.113.159 -
Changed line 5 from:
%width=50px%Attach:apm.png
to:
%width=50px%Attach:apm.png [[Main/DbsGlobal|Global Options]] | %width=30px%Attach:fv.png %width=30px%Attach:mv.png %width=30px%Attach:sv.png %width=30px%Attach:cv.png[[Main/DbsVariable|Local Options]]
June 05, 2017, at 11:59 PM by 10.5.113.159 -
Changed lines 11-13 from:
             1=add 3 sigma limits
              2=add 2 sigma limits
              3=add 1 sigma limits
to:
             1=add +/- 3 set point limits (red lines)
              2=add +/- 2 set point limits (yellow lines)
              3=add +/- 1 set point limits (green lines)
June 05, 2017, at 11:58 PM by 10.5.113.159 -
Added lines 1-15:
(:title APM.SPC_CHART - APMonitor Option:)
(:keywords APM.SPC_CHART, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Statistical Process Control (SPC) chart display option:)

%width=50px%Attach:apm.png

 Type: Integer, Input
 Default Value: 0
 Description: Statistical Process Control chart
              0=OFF
              1=add 3 sigma limits
              2=add 2 sigma limits
              3=add 1 sigma limits

SPC_CHART is a web-interface trend option to create Statistical Process Control (SPC) style charts for Controlled Variables (CVs). When SPC_CHARTS=0, there are no additional limits placed on the trend. As SPC_CHARTS is increased by 1, there are additional ranges added to the CV plots. With a level of 1, new lines at +/- 3 [[Main/OptionSphi|SPHI]]-[[Main/OptionSplo|SPLO]] are added to the plot as red upper and lower control limits. With a level of 2, new lines at +/- 2 [[Main/OptionSphi|SPHI]]-[[Main/OptionSplo|SPLO]] are added to the plot as yellow upper and lower control limits. With a level of 1, new lines at +/- 1 [[Main/OptionSphi|SPHI]]-[[Main/OptionSplo|SPLO]] are added to the plot as green upper and lower control limits. Each level adds an additional two lines.