APM.CV_WGT_SLOPE - APMonitor Option
Main.OptionApmCvWgtSlope History
Hide minor edits - Show changes to output
Changed line 15 from:
See also [[Main/OptionApmCvWgtStart|CV_WGT_START]], [[Main/OptionTrInit|TR_INIT]], [[Main/OptionTrOpen|TR_OPEN]]
to:
See also [[Main/OptionApmCvWgtStart|CV_WGT_START]], [[Main/OptionApmMvDcostSlope|MV_DCOST_SLOPE]], [[Main/OptionTrInit|TR_INIT]], [[Main/OptionTrOpen|TR_OPEN]]
Changed lines 5-6 from:
%width=50px%Attach:apm.png
to:
%width=50px%Attach:apm.png [[Main/DbsGlobal|Global Options]] | %width=30px%Attach:fv.png %width=30px%Attach:mv.png %width=30px%Attach:sv.png %width=30px%Attach:cv.png[[Main/DbsVariable|Local Options]]
Added lines 14-15:
See also [[Main/OptionApmCvWgtStart|CV_WGT_START]], [[Main/OptionTrInit|TR_INIT]], [[Main/OptionTrOpen|TR_OPEN]]
Changed lines 9-11 from:
Description: Slope for weight on future CV error (e.g. [+] favors steady state)
to:
Description: Slope for weight on future CV error
[+] favors steady state trajectory target
[-] favors near term trajectory target
[+] favors steady state trajectory target
[-] favors near term trajectory target
Added lines 1-11:
(:title APM.CV_WGT_SLOPE - APMonitor Option:)
(:keywords APM.CV_WGT_SLOPE, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Slope for weight on future CV error (e.g. [+] favors steady state):)
%width=50px%Attach:apm.png
Type: Floating Point, Input
Default Value: 0.0
Description: Slope for weight on future CV error (e.g. [+] favors steady state)
CV_WGT_SLOPE is how the controlled variable WSPHI, WSPLO, or WSP change with time over the control horizon. This option is used to favor either near-term attainment of the setpoint or long-term (future) steady state tracking. It is normally set to zero but can be adjusted to be positive to increase the weighting for future time points or negative to decrease the weighting for future time points.
(:keywords APM.CV_WGT_SLOPE, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Slope for weight on future CV error (e.g. [+] favors steady state):)
%width=50px%Attach:apm.png
Type: Floating Point, Input
Default Value: 0.0
Description: Slope for weight on future CV error (e.g. [+] favors steady state)
CV_WGT_SLOPE is how the controlled variable WSPHI, WSPLO, or WSP change with time over the control horizon. This option is used to favor either near-term attainment of the setpoint or long-term (future) steady state tracking. It is normally set to zero but can be adjusted to be positive to increase the weighting for future time points or negative to decrease the weighting for future time points.