Main

Main.OptionApmAutoCold History

June 08, 2017, at 11:13 PM by 10.5.113.159 -
Changed lines 5-6 from:
to:
Changed lines 15-17 from:

AUTO_COLD is the number of consecutive bad cycles to wait to attempt a COLDSTART as an initialization mode for an application. It is by default at 0 (no action with bad cycles) but can be set to a higher integer level (1+) as a trigger to initiate a coldstart. When the AUTO_COLD limit is reached, the COLDSTART flag is set to 1 (ON) and it remains on until there is a successful solution. Once a successful solution is found, COLDSTART and BAD_CYCLES are set to zero.

to:

AUTO_COLD is the number of consecutive bad cycles to wait to attempt a COLDSTART as an initialization mode for an application. It is by default at 0 (no action with bad cycles) but can be set to a higher integer level (1+) as a trigger to initiate a coldstart. When the AUTO_COLD limit is reached, the COLDSTART flag is set to 1 (ON) and it remains on until there is a successful solution. Once a successful solution is found, COLDSTART and BAD_CYCLES are set to zero.

June 04, 2017, at 05:34 AM by 45.56.3.173 -
Changed line 7 from:
 Type: Integer, Input/Output

to:
 Type: Integer, Input

Changed lines 9-10 from:
 Description: Cold start model

to:
 Description: Automatically cold start model after a

June 04, 2017, at 05:28 AM by 45.56.3.173 -
Changed lines 1-2 from:

(:title APM.AUTOCOLD - APMonitor Option:) (:keywords APM.AUTOCOLD, Optimization, Estimation, Option, Configure, Default, Description:)

to:

(:title APM.AUTO_COLD - APMonitor Option:) (:keywords APM.AUTO_COLD, Optimization, Estimation, Option, Configure, Default, Description:)

Changed line 14 from:

AUTOCOLD is the number of consecutive bad cycles to wait to attempt a COLDSTART as an initialization mode for an application. It is by default at 0 (no action with bad cycles) but can be set to a higher integer level (1+) as a trigger to initiate a coldstart. When the AUTOCOLD limit is reached, the COLDSTART flag is set to 1 (ON) and it remains on until there is a successful solution. Once a successful solution is found, COLDSTART and BAD_CYCLES are set to zero.

to:

AUTO_COLD is the number of consecutive bad cycles to wait to attempt a COLDSTART as an initialization mode for an application. It is by default at 0 (no action with bad cycles) but can be set to a higher integer level (1+) as a trigger to initiate a coldstart. When the AUTO_COLD limit is reached, the COLDSTART flag is set to 1 (ON) and it remains on until there is a successful solution. Once a successful solution is found, COLDSTART and BAD_CYCLES are set to zero.

June 04, 2017, at 05:27 AM by 45.56.3.173 -

(:title APM.AUTOCOLD - APMonitor Option:) (:keywords APM.AUTOCOLD, Optimization, Estimation, Option, Configure, Default, Description:) (:description Automatically cold start model after this specified number of bad cycles:)

 Type: Integer, Input/Output
Default Value: 0
Description: Cold start model
0  = do not auto coldstart
1+ = cold start after specified number of