SPLO - APMonitor Option

Main.OptionSplo History

Show minor edits - Show changes to output

Changed line 11 from:
The lower range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint low (SPLO) is the lower final target value.
to:
The lower range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint low (SPLO) is the lower final target value. SPHI and SPLO are used with IMODE=3,6,9 when APM.CV_TYPE=1. The single set point SP is used with APM.CV_TYPE=2.
June 26, 2017, at 12:50 PM by 71.83.242.189 -
Added lines 12-13:

See also [[https://apmonitor.com/do/index.php/Main/ControllerObjective|Controller Objective]], [[Main/OptionSp|SP]], [[Main/OptionSphi|SPHI]]
June 08, 2017, at 10:41 PM by 10.5.113.159 -
Changed line 5 from:
%width=50px%Attach:cv.png
to:
%width=50px%Attach:cv.png [[Main/DbsVariable|Local Options]] | %width=30px%Attach:apm.png [[Main/DbsGlobal|Global Options]]
June 01, 2017, at 06:35 AM by 45.56.3.173 -
Added lines 1-11:
(:title SPLO - APMonitor Option:)
(:keywords SPLO, Optimization, Estimation, Option, Configure, Default, Description:)
(:description Set point low for linear error model:)

%width=50px%Attach:cv.png

 Type: Floating Point, Input
 Default Value: -1.0e20
 Description: Set point low for linear error model

The lower range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint low (SPLO) is the lower final target value.