Main

## Main.OptionSphi History

Changed line 11 from:

The upper range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint high (SPHI) is the upper final target value.

to:

The upper range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint high (SPHI) is the upper final target value. SPHI and SPLO are used with IMODE=3,6,9 when APM.CV_TYPE=1. The single set point SP is used with APM.CV_TYPE=2.

June 26, 2017, at 12:49 PM by 71.83.242.189 -

June 08, 2017, at 10:40 PM by 10.5.113.159 -
Changed line 5 from:
to:
June 01, 2017, at 06:35 AM by 45.56.3.173 -

(:title SPHI - APMonitor Option:) (:keywords SPHI, Optimization, Estimation, Option, Configure, Default, Description:) (:description Set point high for linear error model:)

 Type: Floating Point, Input
Default Value: 1.0e20
Description: Set point high for linear error model


The upper range of the target region (dead-band) for a controller that is using an l1-norm error objective. The setpoint high (SPHI) is the upper final target value.